Welcome to YUTE Metal!
Short Description:
Thickness:0.3-10mm
Width:600-1220mm
Availability:In Stock
Product | 7075/7A04/7A09 Aluminum round tube |
Place of Origin | China |
Temper | T6/T651/T7651/T7351 |
Grade | 1000series:1050/1060/1070/1080/1100/1350/1050A/1090/1200/1530 |
2000series:2011/2014/2017/2024/2017A/2017B/2020/2020R/2040/2040A/2080/2080W/2018A/2018B | |
3000series:3002/3003/3104/3204/3030/3030A/3030GA/3030/3030GE/3030R/3060/3060G/3090G/3090 | |
5000series:5005/5025/5052/5040/5054/5056/5083/5152/5A05 | |
6000series:6101/6003/6061/6063/6020/6201/6262/6082/6060G/6060/6060W/6060R/6090A/6090/6090C | |
7000series:7003/7005/7050/7075/7075-T6/7050-T651/7001/7004/7051/7076/7079/7090 | |
8000series:8011/8011A | |
Thickness | 0.5mm-150mm or as the customer’s request |
Diameter | 2mm-2500mm or as the customer’s request |
Length | 1-12m or as required |
Service | Perforated, Cutting special size, Doing flatness, Surface treatment,etc |
Executive Standard | GB/DIN/ANSI/BS/JIS/ASTM/BS |
Certificate | SGS/BV/MTC/IOS/CE |
Delivery time | 7-15 days after deposit |
Container Info | Bundles Packing:Each covered by plastic film, then wraped to be bundles by craft paper |
Carton Packing:Each pcs packed by plastic bag, then put in one carton | |
Wood Pallet packing:Bundles or cartons packing, then put them on wood pallet |
Product | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Others | |
7075 | 0.25 | 0.50 | 1.2-2.0 | 0.30 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.20 | / | Single | Total |
0.05 | 0.15 | ||||||||||
7A04 | 0.40 | 0.50 | 1.2-2.0 | 0.30 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.20 | / | 0.05 | 0.15 |
7A09 | 0.50 | 0.50 | 1.2-2.0 | 0.15 | 2.0-3.0 | 0.16-0.30 | 5.1-6.1 | 0.10 | / | 0.05 | 0.15 |
Aluminum/Aluminium Tube/Pipe Production Process:
The alloy aluminum tube profile is mainly produced by the extrusion method, while the wire rod is produced by the stretching method. The most commonly used extrusion processes are forward extrusion and reverse extrusion. Extruded alloy aluminum pipes and profiles adopt the production process of ingot heating-extrusion-finishing; for heat-treated aluminum alloys that can be strengthened, quenching and aging treatment are also required. The aluminum alloy wire adopts the production process of hot extrusion-annealing-stretching-heat treatment-finishing. The aluminum wire for the conductor is mainly produced in the wire factory, and generally adopts the production process of first continuous casting and rolling to produce aluminum wire rod and then stretching.
7075 is a cold treated forging alloy with high strength and hardness, which is much better than mild steel. The products are suitable for molds, high-strength parts and other fields.
7A04 is the most commonly used superhard aluminum. It is a mature alloy in superhard aluminum. It is used for a long time and widely. It has high strength and good heat treatment strengthening effect.
7A09 is widely used in industries such as molds and high-strength parts.
Application
Lithium battery soft connection, pole lug material, explosion-proof valve, heat sink, sign, electronics, printing, curtain wall, stamping parts, etc.
It is used for alloy casting of structural parts such as aircraft wall panel, front beam girder, joint, strut and landing gear, beauty instrument, notebook shell, etc.